Sony A1 II A1M2 Wood Grip L-Bracket Arca-Swiss Quick Release Plate with Hidden AirTag YW Design

A 98–106 g aluminum L-bracket with an optional solid wood grip, made only for the Sony A1 II.

Most L-brackets for the A1 II block something: the battery door, the HDMI port or the articulating screen. This one is shaped to the A1 II body so none of that happens. It turns your camera into a tripod-ready, Arca-Swiss camera in both orientations, adds a warm wood grip under your fingers, and hides an AirTag inside the base so you can track a camera this valuable if it ever goes missing.

Why A1 II Owners Choose It

• Tripod-ready, horizontal and vertical. The base is a built-in Arca-Swiss quick release plate, and the side arm adds a second Arca-Swiss rail. Switch to portrait orientation in seconds, with no extra plate.
• Hidden AirTag compartment. A snap-shut holder inside the battery cover keeps an Apple AirTag out of sight, so you can locate your camera through Find My. AirTag not included.
• Change batteries without removing anything. The hinged battery cover opens with a ball-detent snap and a constant-pressure spring. Flip it, swap the battery, close it.
• Ports and screen stay free. The side arm leaves the USB-C, HDMI, Ethernet, headphone and mic ports accessible, and the multi-angle screen flips and tilts without pulling it away from the body.
• Lightweight. Just 98 g for the base plate and 106 g with the wood grip, lighter than most aluminum L-brackets for this camera.
• Comfortable hold. A large rounded corner under the grip won't dig into your palm, and the optional solid wood grip gives your fingers a warmer, fuller hold during long shoots.
• Tool-free install. A D-ring screw locks the plate to the tripod socket by hand.
• Strap and rig ready. Two slots for quick-release strap anchors, three 1/4"-20 threads (8 mm deep) on the base, and 1/4"-20 threads with ARRI-style locating holes on the side.

Choose Your Version

Wood Grip L-Bracket

The L-bracket with a solid wood grip: Black Sandalwood (deep purple-black), Desert Ironwood (warm orange-brown) or Black Walnut (rich chocolate-brown). Each grip has its own natural grain.

Base Plate L-Bracket

The same aluminum L-bracket without the wood grip, for the lightest possible setup.

Both are available in Titanium Gray or Black.

Specifications

• Compatible camera: Sony A1 II (Alpha 1 II) only
• Material: aluminum alloy, solid wood grip (wood grip version)
• Weight: 98 g base plate / 106 g with wood grip
• Length: 142.6 mm
• Added thickness: 8.9 mm bottom, 6.6 mm side, 4.2 mm at the grip
• Tripod mount: Arca-Swiss, horizontal and vertical
• Threads: 3 × 1/4"-20 on the base (8 mm deep), 1/4"-20 with ARRI-style locating holes on the side
• Extras: hidden AirTag holder, 2 strap anchor slots, D-ring screw
• Colors: Titanium Gray, Black
• Note: the flash sync terminal is covered while the bracket is installed

FAQ

Does it fit the original Sony A1 or other Sony cameras?

No. It is shaped specifically for the Sony A1 II, which has a different body from the original A1.

Can I change the battery with the bracket on?

Yes. Open the hinged cover on the base and the battery comes out as usual.

Which ports can I use?

All side ports remain accessible, including HDMI and USB-C. The only exception is the flash sync terminal, which is covered by the bracket.

Does it block the screen?

No. The multi-angle screen flips out and tilts freely.

Is an AirTag included?

No. The compartment fits a standard Apple AirTag, sold separately.

Is the camera included?

No. You receive the bracket only.