Hasselblad X2D II & X2D 100C Wooden Grip

Hand-shaped wood grip + Arca-Swiss L-bracket in one 73–105 g piece.

Made exclusively for the Hasselblad X2D 100C and X2D II 100C, this solid wood grip and precision-machined aluminum L-bracket gives your medium format camera a fuller, more secure hold and makes it tripod-ready in seconds — without blocking the battery, the card door, the USB port or the tilting screen.

Why X2D Owners Choose It

• A confident one-hand hold. The X2D is a dense, all-metal camera, and with a larger XCD lens the rig gets front-heavy fast. The inner side of the wooden grip is contoured 1:1 to the X2D's own grip, so it fills your palm without gaps or wobble and lets you carry the camera longer with less finger strain.
• Tripod-ready in both orientations. The base is a built-in Arca-Swiss quick release plate, and the side of the L-bracket adds a second Arca-Swiss rail for vertical shooting. Clamp it straight into any Arca-compatible tripod head — no extra plate needed. The L section slides out to fit your setup.
• Change batteries without removing anything. A hinged, dust-protecting cover sits over the battery compartment. Flip it open and pull the battery as usual — no loosening, no tools, no re-aligning the bracket afterwards.
• Every port and the tilting screen stay free. Side openings keep the card slot and USB-C door fully usable, and a dedicated cutout lets the rear screen tilt without interference.
• Tool-free install. A D-ring screw locks the bracket to the tripod socket by hand. On or off in under a minute, in the field or at your desk.
• No scratches on a camera this expensive. Every surface that touches the camera is lined with a soft protective pad.
• Barely changes the camera's profile. It adds only 6.9 mm at the bottom and 7.3 mm at the side, and the wooden grip sits just 3.5 mm proud of the original grip.
• Room for accessories. Two 1/4"-20 threaded holes (6 mm deep) on the base accept a strap mount, a cage accessory or a second plate.

Choose Your Wood

Rosewood

Warm orange-brown with a fine, silky grain. Extremely dense and hard, it feels cool and solid in the hand and deepens in color with use.

Ebony

Deep purple-black with subtle dark stripes. Pairs naturally with the black X2D body for a quiet, understated look.

Every grip is cut from solid wood, so no two pieces share exactly the same grain.

Specifications

• Compatible cameras: Hasselblad X2D 100C, Hasselblad X2D II 100C (only)
• Materials: solid wood grip + aluminum alloy bracket
• Weight: 73–105 g (depends on wood and configuration)
• Length: 146.8 mm
• Grip height: 58.5 mm
• Added thickness: 6.9 mm bottom / 7.3 mm side / 3.5 mm grip
• Tripod mount: Arca-Swiss (horizontal + vertical)
• Accessory threads: 2 × 1/4"-20, 6 mm deep
• Fastening: tool-free D-ring screw
• Bracket colors: Titanium Gray, Black

Care

Wipe the wood with a dry cloth. Every few months, apply a drop of furniture wax or wood oil to keep the grain rich. Avoid soaking in water and long exposure to direct heat.

FAQ

Do I need to remove the bracket to change the battery?

No. Open the hinged cover on the base and the battery comes out as usual.

Can I open the card slot and USB-C port with the bracket on?

Yes. The side openings leave the port doors fully usable.

Does it work with the X2D II's tilting screen?

Yes. A cutout in the bracket gives the screen room to tilt.

Do I need tools to install it?

No. Tighten the D-ring screw by hand.

Which tripod heads does it fit?

Any head or clamp with an Arca-Swiss standard quick release.

Will it fit the X1D or 907X?

No. It is shaped specifically for the X2D 100C and X2D II 100C.